NON-TOXIC SILICONE RUBBER “I-GUM”
Completely non-toxic silicone rubber in paste form, to be directly applied onto the model you want to replicate. Prior to using it Part A should be mixed with its Part B catalyst paste (in equal parts, 1: 1) mixing until you have a homogeneous mixture. No need to wash the mixing tools after use, since it is non-stick, and it is not necessary to apply release agents to the model.
+ Viscosity – Moldable paste,
+ Working time – 5 – 10 min;
+ Weight ratio A / B – 1: 1;
+ Type – non-toxic,
+ Hardness – 30 Shore A.
Note: Do not use under 8-10°C [45-50 F].